CarbaMic chloride, Methylpentyl-
Carbamic chloride, methylpentyl-
CAS: 61500-82-1
Molecular Formula: C7H14ClNO
CarbaMic chloride, Methylpentyl- - Names and Identifiers
| Name | Carbamic chloride, methylpentyl- |
| Synonyms | CarbaMic chloride, Methylpentyl- Carbamic chloride, methylpentyl- N-Methyl-N-n-pentylcarbaMoyl chloride Carbamic chloride, N-methyl-N-pentyl- |
| CAS | 61500-82-1 |
CarbaMic chloride, Methylpentyl- - Physico-chemical Properties
| Molecular Formula | C7H14ClNO |
| Molar Mass | 163.65 |
CarbaMic chloride, Methylpentyl- - Introduction
Carbamic chloride, methylpentyl-, chemical formula CH3NHCOC4H9Cl, referred to as MPC, is an organic compound.
Nature:
-Appearance: Colorless liquid at room temperature.
-Boiling point: about 132 degrees Celsius.
-Density: Approximately 0.98 g/mL.
-Melting point: about -59 degrees Celsius.
Use:
MPC can be used as a reagent in organic synthesis, and is often used to mediate the nucleophilic addition reaction of aldehydes or ketones, especially in the formation of 5,6-cycloadducts. In addition, MPC can also be used as a chlorine source for chlorination.
Preparation Method:
Carbamic chloride, methylpentyl-can be prepared by the reaction of formyl chloride and pentanone. The specific preparation steps are as follows: dissolving pentanone in anhydrous diethyl ether, then dropwise adding formyl chloride, separating the organic phase after completion of the reaction, and obtaining the target product by distillation.
Safety Information:
MPC is an organic compound and has a certain degree of danger. In the use or storage need to pay attention to the following safety matters:
-In case of contact with skin or eyes, rinse immediately with plenty of water.
-Avoid breathing its vapors. Wear suitable protective goggles, gloves and a mask during operation.
-Keep away from fire and high temperature, and maintain a well-ventilated operating environment.
-Avoid contact with harmful substances such as oxidants.
-Store away from fire and high temperature, and place in a cool, ventilated and dry place.
When using or handling MPC, be sure to read and follow the relevant safety instructions and appropriate handling methods.
Nature:
-Appearance: Colorless liquid at room temperature.
-Boiling point: about 132 degrees Celsius.
-Density: Approximately 0.98 g/mL.
-Melting point: about -59 degrees Celsius.
Use:
MPC can be used as a reagent in organic synthesis, and is often used to mediate the nucleophilic addition reaction of aldehydes or ketones, especially in the formation of 5,6-cycloadducts. In addition, MPC can also be used as a chlorine source for chlorination.
Preparation Method:
Carbamic chloride, methylpentyl-can be prepared by the reaction of formyl chloride and pentanone. The specific preparation steps are as follows: dissolving pentanone in anhydrous diethyl ether, then dropwise adding formyl chloride, separating the organic phase after completion of the reaction, and obtaining the target product by distillation.
Safety Information:
MPC is an organic compound and has a certain degree of danger. In the use or storage need to pay attention to the following safety matters:
-In case of contact with skin or eyes, rinse immediately with plenty of water.
-Avoid breathing its vapors. Wear suitable protective goggles, gloves and a mask during operation.
-Keep away from fire and high temperature, and maintain a well-ventilated operating environment.
-Avoid contact with harmful substances such as oxidants.
-Store away from fire and high temperature, and place in a cool, ventilated and dry place.
When using or handling MPC, be sure to read and follow the relevant safety instructions and appropriate handling methods.
Last Update：2024-04-10 22:29:15
